iTieDye: Your Tie-dye Forum
May 24, 2012, 01:00:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you want to join the forum, respond to your registration confirmation email with a coherent paragraph outlining your interest in tie-dyeing. All registrations without this response will be ignored.
 
   Home   Help Search Calendar Login Register  
Visit the new Tie-Dye Wiki! Register and contribute more information!
Pages: [1]
  Print  
Author Topic: Direct application dyeing  (Read 1210 times)
eileen
Newbie
*
Posts: 7


View Profile
« on: June 18, 2008, 08:55:26 AM »

Haven't done this in so many years...I just cant seem to recall a few things.Sure appreciate some help. When applying dye (using 8 oz squeeze bottles)...let's say a rainbow spiral- As I recall,I applied the dye in pie shaped wedges, but "split" the rainbow(good old Roy G.Biv) at some point. Think I applied Three colors 1st in a clockwise direction,as slices of pie go, thenwent to the other side of color #1 and continued rainbow progression from there (now proceeding counterclockwise). Does anybody know what I'm talking about? Do I? Please share your knowledge of order of colors that works for you, and anything else related. Again,thanks!
Logged
deb
Full Member
***
Posts: 205



View Profile WWW
« Reply #1 on: June 18, 2008, 12:28:15 PM »

OK, I'm assuming that the spiral is wound and then tied off in 6ths (like with 3 rubber bands).

Using one of the primaries (yellow, turquoise, or fuscia), dye 3 segments. Say you've used yellow. Then using another color (say fuschia), dye over one of the yellow segments (to make orange) and the next TWO segments. Then with the turquoise, dye over ONE of the fuschia (to make purple) and then the next TWO. The final segment should bring you back to one of the undyed yellow segments, which would then become green when mixed with the turquoise.

For a "real" red, though, I find it more expedient to use an actual red where I want it, instead of the fuschia, while leaving the fuschia to mix with the other primaries to make the purple and orange.

Does that actually make sense?
Logged

eileen
Newbie
*
Posts: 7


View Profile
« Reply #2 on: June 18, 2008, 02:22:33 PM »

Thanks for your answer!  I actually use nearly a full spectrum of color-Green is the only color I make ON the shirt. I apply MX dyes; 310,308,202,104,108,410,406,810, and 804. I prefer the tones,the control, and the interesting complexity where the colors marry. As for evaluating whether something makes sense...well,I'm probably not a very good judge of THAT! grin
Logged
2D4
Full Member
***
Posts: 187



View Profile WWW
« Reply #3 on: June 19, 2008, 04:41:52 AM »

I use many colors (12) in my classic spiral as well. Sometimes positioning the same color on the reverse
side, sometimes overlapping an adjacent color on the reverse side for a different effect.

Jo
Logged

2Dye4 • Distinctive Tie Dye
http://www.2dye4.biz
http://www.artfire.com/users/2Dye4DistinctiveTieDye
"Someone will love it!"
Marg
Jr. Member
**
Posts: 83


View Profile
« Reply #4 on: June 19, 2008, 06:12:19 AM »

Hi Jo, Would you be willing to share what colors you use in your spiral? Peace, Marg
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!